// Tips & tricks 1

Install your Spiios
in the same depth

As a first rule of thumb, we always recommend that you install your Spiios in the middle of your rootzone for both greens, tees and fairways.

The Spiio is two inches wide and the soil moisture probe starts about half an inch below the top of the Spiio. Practically, this means that if you want data from, say, a two inch depth, then you need to install your Spiio one inch below the turf thatch.

Previous
Next
// Tips & tricks 3

Cut your cups about
one inch apart

Cut two cups approx. one inch apart forming a bridge between the two cups. Using a knife or an ice pick, you can break the bridge of sand under the one inch gap.

Collect the excess sand on a towel or in a bucket for backfilling.

// Frequently Asked Questions

Spiio Data

How is the my data transmitted?

The Spiio sensor has a built-in global simcard. Your data is automatically transmitted via the strongest network operators in your area/country. In the US we use both T-mobile, AT&T and Sprint.

How can I access my data?

You can access your data 24/7 through Spiio's apps. Download our iOS app here and our android app here.

Spiio is also accessible through your browser via app.spiio.com
Our preminium dashboard is accessible via map.spiio.com

What type of data are collected?
  • The soil moisture sensor data is a capacitive sensor measuring the volumetric water content in the substrate (%VWC)

The temperature sensor effectively measures in-ground temperatur when below grade and air temp when above grade.

The salinity sensor measures the Electrical Conductivity (EC) in the substrate.

The light sensor measures LUX or Foot Candle values when placed above ground.

How often is data sampled and transmitted?

The Spiio sensor collects data every hour and transmits data 3-5 times a day as a default. You can customize and adjust when you want data according to your workday and routines in our app.

Where is my data stored?

Your data is securely stored on Google Cloud servers. We are taking all precautions and measures to secure and backup your data continuously so it is safe with us. You can always download your data in our app on an ongoing basis.

// Tips & tricks 4

Insert your
Spiio horizontally

Insert you Spiio from right to left as seen in picture. Insert pointy part of the Spiio fully in soil leaving one cup with no Spiio in it for easier backfilling. Make sure soil is compacted around the probe.

// FAQ

Frequently
asked questions

The estimated average lifetime of a Spiio is 5 years. Now that might vary due to environmental conditions such as network strength, how deep it is buried and how often you would like data. In fact, you don't have to worry about this as we offer a lifetime warranty on the battery, which means that we will ship you a free replacement when the battery is dead.

The best way to look at this is that your Spiio connects like your cellphone via cellphone towers. In fact, it is like putting a cellphone in the ground. This cellphone service is already built into your Spiio so you don't have to anything else than turning it on. Also, we offer our service in more than 200 countries globally.

Your data is yours and always accessible via our web-based app: app.spiio.com You can download you data or build integrations with our API. Your entire history of data is available as long as your subscription is active.

video faq
// FAQ

Spiio's wireless sensor

What data is Spiio measuring?

The Spiio wireless sensor has four sensors in one wireless device:

  • Soil moisture sensor
  • Temperature sensor
  • Salinity sensor
  • Light sensor
How many sensors do you recommend?

We recommend placing 1-2 sensors per green as a standard in order to get a wide data set from all microclimates on your course.

Alternatively, placing 6-8 around your course will allow you to capture specific microclimates and reference greens that you can benchmark performance from.

We also recommend using Spiio for fairway irrigation monitoring.

How big of an area does it cover?

The best way to think about this is that your Spiio sensor takes a spot measurement in the near proximity to where it is placed. You would ideally choose reference spots that represents multiple areas or an either dry, average or wet reference greens.

How long is the battery life?

The battery is rated for five years of standard usage with five customized data transmissions per day. Now, conditions and cell service varies a lot from place to place so this is a guide. When battery runs out, Spiio will send you a completely FREE new Spiio sensor as long as you are still subscribed to the Spiio Service.

How deep can I install it?

This might vary significantly according to network coverage, but the rule of thumb is that the Spiio sensor can be installed at a max depth of 2 feet (50cm). There's no guarantee we can go this deep as it requires good cell service in your area.

How study is the Spiio sensor?

This Spiio wireless sensor has the highest IP ratings on the market: IP-68 and IP-69K.

In fact we have gone way beyond these global certification standards; accelerated lifetime tests show that the Spiio can last 20+ years in the ground.

// Dashboard Video tutorials

How to navigate the
Map & List view

// Dashboard Video tutorials

Hot to use your
Heat Map

// Dashboard Video tutorials

How to set up
customized thresholds

// Dashboard Video tutorials

How to invite users
and set data schedule

// Dashboard Video tutorials

How to set up
your profile

// what our customers are saying

Contact Spiio for a referral in your area

Emilia Clarke
Tim Huber
CGCS, Director of Agronomy
The Club at Carlton Woods
"I was drawn to Spiio sensors early on because of the numerous application option they can be used for around the golf courses and clubhouse grounds. We now have 20 Sensors that we primarily use to track soil temperatures and soil moisture. We have also found them very useful logging light data in sunny and shaded areas to help us illustrate variable in turf quality. They are reliable, accurate, and require minimal time to install or move."
Emilia Clarke
Tim Zevotek
CGCS, Director of Agronomy
Roaring Fork Club
"Spiio has turned out to be a game-changer on the course. With multiple microclimates throughout our property it has given us the ability to track soil temperatures for specific application timing such as seed-head suppression. The ability to see significant data such as temperature, moisture, and salinity gives us immediate insight on what is happening below the surface. The light sensor has also given us the data needed to remove problem shade areas around our putting surfaces."
Kyle McClintick
Director of Agronomy
Calabasas Country Club
"Spiio has been a great tool for our team for maintaining overall turf-grass health. It has giving us the versatility to check on soil moisture and salinity levels from anywhere. To ensure the best turf health and playing conditions when using reclaimed water, it is crucial we maintain proper moisture management."
Martin Brummel
Grounds Manager
"Spiio's added value to monitor online 24/7 with wireless sensors the moisture balance and temperature curve in the soil profile of the pitches"
// Sp-110 wireless sensor

Four sensors in
one wireless device

Receive soil moisture, temperature, salinity and light data from the ground hour by hour around the clock. Spiio’s SP-110 sensor is completely wireless and communicates via the best cellular carrier in your area. Read More.

Lawn & Landscape video showcase
// In-ground Data

Know your rootzone temps 24/7,
make better agronomic decisions